THERMOSTATIC 2 WAY SHOWER, RAIN HEAD, ARM & 6 BODY JETS

This is a 'Combo' set comprising of a 2 way 'Designer' Thermostatic Shower Valve, a Quality Rain Shower Head with a matching Chrome Arm and TWO sets of 3 Body Jets. 1. SHOWER VALVE: The 'All Metal' Thermostatic Shower Mixer Valve is Wall-mounted and attaches to concealed pipework. There are 2 outlets, independently controlled, and the body is very solidly made of brass and finished with highly polished Chrome. The 'female' inlets/outlets are 3/4" BSP, although they do detach to reveal male 1/2" BSP connections. The beautiful silver chrome 'mirror-like' Front Plate measures approx 17.5 cms wide by 32.5 cms high. The body of the Valve requires a minimum recess depth of 7.5cms. The upper and middle knobs control the 'On/Off' for the 2 outlets. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. The Quality Rain Shower Head is very solidly made from brass with a polished Chrome finish. It measures some 7.5" (19 cms) in diameter and has a swivel joint on top. The nozzles are easy clean rubber. 3. The round style Arm is solidly made of Brass and finished in matching Chrome and it comes with a chrome cover plate. It measures some 35 cms long and has a drop of 7 cms. 4. The Water Massage Body Jets are wall-mounted. They are solidly made of Brass with a highly polished Chrome Finish. Each set of these Round Style 'Concealed' Body Jets has 3 individually adjustable outlets. Each outlet measures 5 cms in diameter and has 9 holes. The front cover plate is 30 cms high, 6 cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework and there are securing nuts to assist with installation. The inlet connection at the back is 1/2" BSP 'male'.